Product Description

The UI***0 is a Single-Band HSPA+/WCDMA and Quad-Band EDGE/GPRS/GSM module solution
which supports HSPA+ *4.4Mbps(downlink)and 5.*6Mbps(uplink)for data transfer. In areas where
HSPA+ is not available, it still enable reliable and secure data connection over UMTS at speed up to **4
Kbps or EDGE at speed up to **7 Kbps or GPRS at speed up to *5.6 Kbps.
Except used as a standard wireless modem through AT command, It offers Audio, SMS, MMS,
Phonebook. It is ideal for a wide range of products including Tablet, Gateway, Telematics, Tracking
solution, Security solution and much more.

UI***0
HSPA+ Cellular Module
General features:
• HSPA+ downlink up to *4.4Mbps
• HSUPA uplink up to 5.*6Mbps
• WCDMA(UMTS) uplink up to **4kbps
• Single-Band UMTS (HSPA+)
***0 MHz
• Quad-Band
GMS **0/**0/***0/***0 MHz
• GPRS multi-slot class *2
• UMTS/HSPA+ 3GPP release 7
• GSM 3GPP release *9
• Output power:
- Class 4 (2 W) for GSM**0
- Class 3 (0.*5 W) for UMTS
- Class E2 (0.5 W) for EDGE**0
- Class E2 (0.4 W) for EDGE***0
- Class 1 (1 W) for GSM***0
• Control via AT commands
(Hayes 3GPP TS *7.**7 and *7.**5)
• SIM Application Toolkit (release *9)
• Supply voltage range: 3.3 ... 4.2V
• Power consumption:
- Sleep mode - Power down *0 μA
- Average Supply Current < **0mA
• Temperature range
- Normal Operation: **0° to **5°CC
- Restricted Operation: **0° to **5°CC
- Storage: **0° to **5°CC
Specification for HSPA+ data:
• HSPA+: max. *4.4 Mbps (DL), 5.*6
Mbps (UL),
Special features:
• Improved power-saving modes
• USB driver for Microsoft
Windows***0/XP/Vista*2/*4,Windows7
• RIL/NDIS/USB driver for devices based
on Windows Mobile5.0 and its Successor
• USB driver for Linux2.4.x, Linux2.6.x
• RIL for android2.3/4.0 and its Succersor
• Customer IMEI as variant
• Firmware update via USB
Specification for UMTS data:
• UMTS: Max. **4 kbps (DL),
  Max. **4 kbps (UL)
Specification for EDGE data:
• EDGE class *2: Max. **7 kbps (DL),
   Max. **8 kbps (UL)
• Mobile station class B
• Coding scheme MCS **9
Interfaces:
• **-pins stamp-hole connector
• Size *5**8*2.2mm
- Power supply
- USB 2.0 high speed
- USIM/SIM card interface 3 V, 1.8 V
- UART
- PCM
- Reset
- LED
- Antenna
- Wake up in/out
- GPIOs
Specification for GPRS data:
• GPRS class *2: Max. *5.6 kbps (DL),
   Max. *2.8 kbps (UL)
• Mobile station class B
• Full PBCCH support
• Coding schemes CS **4
Specification for CSD data:
• GSM data rate *4.4 kbps, V.**0
• UMTS data rate *7.6 kbps, V.**0
• RLP (Non-transparent mode)
Typical application scene:
• Ultra-thin Tablets
• Telematics
Specification for SMS:
Specification for voice:
• Triple-rate codec for HR, FR and EFR
• GSM & 3GPP: Adaptive multi-rate AMR
• DTMF supported
• Point-to-point MO and MT
• SMS cell broadcast
• Text and PDU mode
• MMS
Approvals:
• RoHS